Spare mount for Blackburn's 2'Fer XL front or rear light
Attaches Blackburn Local Lights to any rack.
With the push of a button, the 2’Fer can switch between a white 60 lumen front light and a red 20 lumen rear light. Holding the button for 2 seconds turns the light on and off, and pushing the button once changes modes between white solid, red solid, white flashing and red flashing. The light also remembers which mode you were last using and turns on in that mode. - Charging cable included, no tools required - Lithium Polymer battery - Waterproof to IP-65 standard - 3 hour recharge time - 18g / 0.04lb each As Front: - 60 Lumens - Runtime: High 1.5hrs, Flashing 5hrs As Rear: - 20 Lumens - Runtime: High 1.5hrs, Flashing 5hrs
Not too long ago, a 400 lumen headlight for this price would have been a pipe dream, but now the Blackburn DayBlazer 400 is a dream come true! Featuring eye-popping BLITZ daytime running mode to grab the attention of cars, IP-67 submersibility, and ample side visibility, the DAYBLAZER 400 puts light where riders need it most. - No tools required - Lithium-ion battery - Waterproof to IP-67 standard - 3 hour recharge time - LED Charge Indicator - Runtime: High 1hr (400 lumen), Low 5 hrs (200 lumen) - Runtime Pulse/Strobe: 6hrs (200 lumen)/10 hrs (200 lumen) - 59g
With 2 LEDs pumping out 65 lumens of power, 270 degrees of visibility, and Blackburn's unique BLITZ daytime running mode, the DAYBLAZER 65 is focused on safety, so you can focus on your ride. Also, because of the narrow profile of our unique mounting bracket, the DAYBLAZER 65 tail light can be mounted to just about anything you can think of from round or aero seat posts, to seat stays, to a rear rack, or your back pack - Charging cable included, no tools required - Lithium Polymer battery - Waterproof to IP-67 standard - TIR Lenses - LED Fuel Gauge/Charge Indicator - Polycarbonite Construction - 2 hour recharge time - Runtime: Solid 1.6hrs (50 lumen), High Flash/Low Strobe 3hrs (65 lumen)/6hrs (35 lumen) - 48g
Two really smart, compact USB lights that act as either a front or rear... its a 2Fer. With the push of a button, the 2’Fer can switch between a white 60 lumen front light and a red 20 lumen rear light. Holding the button for 2 seconds turns the light on and off, and pushing the button once changes modes between white solid, red solid, white flashing and red flashing. The light also remembers which mode you were last using and turns on in that mode. - Micro USB charging connection - LED fuel gauge/charge indicator - 180 degree visibility - No tools needed - 1 LiPo battery - 18 Grams
Looking for a light set that is simple, affordable, and bright? The Blackburn DAYBLAZER 400 and Click USB combo is just the ticket. The DAYBLAZER 400 features the BLITZ daytime running mode, versatile mounting options, and excellent side visibility, while the Click rear light packs 20-lumens of light in a tiny, easy-to-use package. DAYBLAZER 400 Front Light - No tools required - Lithium-ion battery - Waterproof to IP-67 standard - 3 hour recharge time - LED Charge Indicator - Runtime: High 1hr (400 lumen), Low 5 hrs (200 lumen) - Runtime Pulse/Strobe: 6hrs (200 lumen)/10 hrs (200 lumen) - 59g CLICK USB Rear Light - Charging cable included, no tools required - Lithium polymer battery - Waterproof to IP-65 standard - 3-hour recharge time - Lumens: High 20, Flash 20 - Runtime: High 1.5hrs, Flash 3hrs - Weight: 22g/0.05
Has Your Back, And Front, Day Or Night. Featuring eye-popping BLITZ daytime running mode to grab the attention of cars, IP-67 submersibility, and ample side visibility, the DAYBLAZER 400 puts light where riders need it most. Combined with 65 lumens on the rear DAYBLAZER 65, this combo is focused on safety, so you can focus on your ride. - 107 Grams (59 front, 48 rear) - 2 lithium polymer batteries included - Blitz 400 lumen, 1 hr runtime; low 200 lumen, 1.5 hr runtime; pulse 200 lumen, 6 hr runtime; strobe 200 lumen, 10 hr runtime - Charges via any standard USB port (charging cable included) - Solid 50 lumen, 1.6 hr runtime; high flash 65 lumen, 3 hr runtime; low strobe 35 lumen, 6 hr runtime - IP-67 submersible - ingress protection rating or "IP rating," is a techy way to describe the level of water- and dust-proofness of a product. This light meets the IP-67 standard, which means it is totally protected against dust/grit and fully protected against the effects of immersion between 15cm and 1 meter for 30 minutes.
SP-12 Flex-Tight Seatpost Bracket for most CatEye taillights
Optional Accessory Rear rack Bracket for mounting most CatEye Taillights to rear racks with 50/80 mm spaced mounting holes.
Be seen with CatEye's Omni 3 Taillight, which uses Omni Directional Technology for 360 degrees of visibility. Three super-bright LEDs light up in three different modes so you can customize the pattern and get run times up to 200 hours. Plus, CatEye's tool-free mount makes installation a breeze.
Optional Accessory Saddle Rail Mount Bracket for most CatEye taillights.
Legendary CatEye reflector technology and white LED come together to provide eye-catching side visibility, ensuring your safety where accidents happen most. Intersection collisions are responsible for the majority of bicycle accidents, and the Orbit 2 provides dynamic motion visibility that headlights and safety lights alone just can't match. Installs easily to 24-29" wheels with 28-32 spoke counts. Don't let lack of side visibility make you a statistic; stay safe and seen with Orbit 2 spoke lights.
See and be seen with CatEye's HL-EL135 Headlight. This compact light uses 3 super-bright LEDs for a wide beam that lets you see more of the road. With 2 AA batteries, it provides up to 80 hours of run time on steady mode and up to 320 hours on flash mode. Plus, the no-tools universal mount makes installation fast and easy.
Safety first, the AMPP400 comes with maximum side visibility, securely held in place with our adjustable FlexTight bracket. FEATURES: - High power rechargeable headlight (400 lm) - Powerful wide beam with OptiCube lens technology - Excellent side cut outs for enhanced side visibility - Large-capacity lithium-ion rechargeable battery - Battery indicator mode flashes red when less than 20% - Lightweight and compact polycarbonate body - USB rechargeable (Micro USB cable included) - Mode memory function - 4 light modes: High, Low, Daytime HyperConstant, Flashing - Secure FlexTight bracket for quick installation - Water resistant - Optional helmet mount, center fork bracket available Modes/Run time: - High mode: 400 lumens | 2.5hrs - Low mode: 200 lumens | 5hrs Dimensions/Weight: - 32 x 102 x 33 mm - Weight: 95 grams (light unit and battery) Light source: - High intensity white LED X1 Optional Parts: - Center Fork Bracket (5342440) - Helmet mount (5341831N) Recharge time: - Approximately 4-5hrs (USB2.0 recharge) - About 300 recharge times (until rated capacity drops to 70%
For seeing the road and staying safe, CatEye's EL135/Omni 3 Light Kit includes their fine EL135 headlight and Omni 3 taillight. To light the way, the compact headlight with its no-tools universal quick-release handlebar mount boasts 3 super-bright LEDs, constant and flashing modes, and CatEye's OptiCube lens technology for a wider, 150-candlepower beam with excellent visibility. Meanwhile, for the back, CatEye's Omni 3 with their FlexTight mount and included clothing clip can be placed almost anywhere and it uses their Omni Directional Technology for 360 degrees of visibility and boasts 3 ultra-bright LEDs plus constant, flashing and rapid modes.
Safety first, the AMPP500 comes with maximum side visibility, securely held in place with our adjustable FlexTight bracket. Now paired with the smallest member of the Rapid family for 25 lumens of rear coverage at only 22 grams! AMPP500 FEATURES: - High-power rechargeable headlight (500 lm) - Powerful wide beam with OptiCube lens technology - Excellent side cut outs for enhanced side visibility - Large-capacity lithium-ion rechargeable battery - Battery indicator mode flashes red when less than 20% - Lightweight and compact polycarbonate body - USB rechargeable (Micro USB cable included) - Mode memory function - 4 light modes: High, Low, Daytime HyperConstant, Flashing - Secure FlexTightbracket for quick installation - Water resistant - Optional helmet mount, center fork bracket available Modes/Run time: - High mode: 500 lumens | 1.5hrs - Low mode: 250 lumens | 3.5hrs - Daytime HyperConstant mode: 500/100 lumens | 5hrs - Flashing mode: 100 lumens | 40hrs RAPID MINI FEATURES: - Compact and lightweight (25 lm) - Lithium-ion rechargeable battery - USB rechargeable (Micro USB cable included) - Low-battery indicator - 4 modes - Charging time: 2h - Mode memory function - Battery Auto Save (The mode automatically changes to flashing when the battery power gets low.) - Seat post SP-14-R bracket (Ø21.5-32mm)
Introducing the CatEye Rapid X2 Kinetic, a movement-sensitive, day and nighttime safety light for your ride. Safety you'll never notice, but those around you will. The CatEye Rapid X2 Kinetic is a 50-lumen, USB rechargeable bicycle safety light that mounts easily on your seatpost. A built-in accelerometer automatically switches into a constant burst mode when it senses a sudden change in speed. Similar to daytime running lights on an automobile, the Rapid X2 Kinetic helps make your presence known as a cyclist. 180 degrees of visibility allows you to be seen from varied perspectives. A Battery Auto-Save feature makes sure you’re covered the entire ride by automatically switching to a flashing mode should the battery run low. With up to 30 hours of run time, the Rapid X2 Kinetic ensures you’ll be drained from your ride long before your light is. What's Included: - Rapid X2 Kinetic light, Rapid X2 attachment base, one large and one small attachment band, and a micro USB charging cable - *This light does not completely work with braking. The motion sensor may not respond in some circumstances depending on the light installation location, cycling speed or weather condition. We recommend that you keep a safe distance between vehicles when cycling.
- Compact, sleek design - Robust safety features including daytime and nighttime pulse modes - Side illumination ports allow cyclists to be seen when riding across traffic lanes - 6 modes including Daytime Pulse and Nightime Pulse - Fully USB rechargeable: no batteries to buy or replace - Memory function allows light to turn on at the last mode that was used - Power saving function automatically switches the light to the lowest lumen output when the battery gets to 10% power or less - Built-in battery indicator: red = lower than 25%, yellow = 50%-25%, green = fully charged - No tools bracket - Sold with Avenue R-45 rear taillight - Rear light includes 5 modes - Side illumination ports
X3 Front Light: - Double-lens technology provides HIGH-QUALITY precise light distribution - LED STRIP shows battery level - Side lighting for INCREASED VISIBILITY AND SAFETY - MEMORY FUNCTION remembers the last mode used - Fully USB-RECHARGEABLE - NEW snap-tight bracket - 30 LUX - 5 Modes - Run time on Eco = 24 hrs - Run time on High Steady = 4 hrs XR Rear Light: - Light guide for INCREASED VISIBILITY AND SAFETY - MEMORY FUNCTION remembers the last mode used - Fully USB-RECHARGEABLE - Compact size - Bracket with flexible mounting option - .06 LUX - 5 Modes - Run time on Eco = 36 hrs - Run time on High Steady = 20 hrs
This mount is designed to securely attach your Light and Motion Seca, Vega, or Stella headlight (sold separately) to your helmet. With a helmet mount, the light is always pointing where you're looking.
Replacement bar mount for Urban lights with thumb screw for quick removal. Has a quick release design allowing the mount to quickly separate from the light. Compatible with all model year Urban lights. - Includes mount, strap, allen key, and bolt
The NiteRider Lumina Handlebar Strap Mount offers a wide variety of handlebar size fitments and remains rock solid while riding through rough terrain. It’s easy to install and, like all NiteRider mounts, features a quick release tab for when it’s time to recharge or leave your bike unattended. System Compatibility: - Lumina Series - Mako Series - MiNewt Cordless Series
- Attaches to rear racks - Compatible with: Blinky 3,5,7 and Superflash - 25mm between each of the top horizontal holes (center to center) - Requires an "L bracket" that typically comes with a rear rack. If your rack is missing the L bracket, you can purchase Planet Bike's rack hardware pack
- Fits 25.4-31.8mm handlebars - Compatible with Blaze, Beamers, 1200, 5000x and Super Spot
- Fits seatpost (up to 31.8mm) or seatstay - Compatible with: Blinky 3,5,7, all Superflash lights and Blinky Safety rear light - Use with Blinky Safety Front light bracket to fit oversize (~31.8mm) handlebars
Portland Design Works' Fenderbot Taillight shines brightly to enhance your visibility when the sky turns dark. It boasts a 1-watt LED with three modes and precision reflector to notify others of your presence. And, the Fenderbot bolts directly to your fender so it's always on your bike. - Bright red LED and precision reflector - Bolts directly to fender to prevent theft - Weatherproof exterior for all season riding - Weight: 62 g (2.2 oz) - Runs on 2xAAA batteries (included) - Lifetime PDWarranty
Replacement Part – Universal Handlebar Bracket - Fits all current Serfas headlights with a removable bracket - Fits bars up to 31.8mm horizontal & vertical adjustable - Easily removes from bar in seconds - No tools needed - Works With: TSL-100, TSL-150, TSL-150+, TSL-200, TSL-250, TSL-250+, TSL-500, TSL-500+, TSL-1000, TSL-1500, SL-155, SL-255, USL-155, USL-305, USL-505, TSL-350, TSL-550, TSL-750, TSL-T1000, TSL-LT1000, TSL-1200, TSL-1800, TSL-2500, HL-1.1, & SL-30WP - Works for all Serfas headlights EXCEPT for SL-200 & SL40WP
Keep your favorite light running with Serfas' RB-LI Replacement Battery. This Lithium-ion battery is works with Serfas' True 150, 250, and 500 lights.
Keep your favorite light running with Serfas' RB-LI+ Replacement Battery. This Lithium-ion battery compatible with Serfas' True 150+, 250+, and 500+ lights.
Page 1 of 2 Next page